Technological process automated control systems, sensors, transducers

 

are intended for the use during repair and equipment modernization and devices upgrade by replacing the old parts with the modern ones

  • Intelligent programmable controller
  • Two-channel digital temperature controller
  • Flame digital controller
  • Power supply module MP
  • Load management module MUN
  • Backup power module MP
  • Spark-proof resistance control module MKS
  • PC adapter module MSPK-05A
  • Spark-proof voltage measurement module MIN-01
  • Current measurement module MIT-01
  • Interface converter USB-RS 232, 485

Intelligent programmable controller

Intelligent programmable controller (central processor and display module MCPI) provides programming, operation, control, communications with external devices, parameters setup and display depending on the task. It can be applied in "Smart house", "Intelligent building" systems and when producing local and global automatic control systems in industrial plants, office buildings, hotels, private homes.

Documents

Intelligent programmable controller (central processor and display module MCPI) rus (pdf)

Two-channel digital temperature controller

Two-channel digital temperature controller (temperature control module MKT) is designed for temperature measurement and data transmission to the system.

Documents

Two-channel digital temperature controller (temperature control module MKT) rus (pdf)

Flame digital controller

Flame digital controller (flame control module MKP) is used to indicate the presence or the absence of the flame and transmission of information about sensors condition to the system.

Documents

Flame digital controller (flame control module MKP) rus (pdf)

Power supply module MP

Power supply module MP is used to form the system’s power supply.

Documents

Power supply module MP rus (pdf)

Load management module MUN

Load management module MUN is used to enable or disable different loads (electric motors solenoid valves, pumps, fans, etc.)

Documents

Load management module MUN rus (pdf)

Backup power module Mr

Backup power module MR provides ability to connect backup power (eg battery) in case of interruption of voltage supply and disconnect when it appears without system operation interrupting.

Documents

Backup power module MR rus (pdf)

Spark-proof resistance control module MKS

Spark-proof resistance control module MKS is designed to control gradual valves smooth servo drive position on the signal position resistive sensor and transmission of information about the status of sensors in the system

Documents

Spark-proof resistance control module MKS rus (pdf)

Spark-proof discrete entry control module MKD

Spark-proof discrete entry control module MKD is designed for connection sensors with the "mechanical contact" or "open collector" output signal and status of sensors (locked \ unlocked) information transferring to the system.

Documents

Spark-proof discrete entry control module MKD rus (pdf)

Spark-proof voltage measurement module MIN-01

Spark-proof voltage measurement module MIN-01
Voltage measurement module MIN-01 (PISHB. 426132.004) is designed to measure the effective value of AC voltage and transmission of measured values via RS-485 (transmitted information protocol MODBUS RTU)

• alternating current voltage measurement;
• transmission of measured values via RS-485

Technical characteristics


PARAMETER

Value

maximum measured AC voltage, V

500

Voltage supply, V

14-33

Power consumption, W, not more than

2

Operating temperature range

from - 50 ° C to + 85 ° C

This module has galvanic separation of inputs and outputs up to 1000 V.

Documents

Spark-proof voltage measurement module MIN-01 rus (pdf)

Current measurement module MIT-01

Current measurement module MIT-01 (PISHB.426132.005)
is designed to measure the actual value of alternating current and transmission of measured values via RS-485 (transmitted information protocol MODBUS RTU).

• Measurement of the actual value of the AC voltage;
• Transmission of measured values via RS-485
Technical characteristics


PARAMETER

                    Value

maximum measured voltage alternating current, V

5

Supply voltage, V

14-33

Power consumption, W, not more than

2

Operating temperature range

from - 50 ° C to + 85 ° C

 
This module has galvanic separation inputs and outputs up to 1000 V

Documents

Current measurement module MIT-01 rus (pdf)

Interface converter USB-RS 232, 485

Interface converter USB-RS 232 is designed for the mutual conversion of USB and RS-232 interface signals. It allows you to connect to an RS-232 industrial information network a device (eg PC), which has a standard USB B - port. The device has a galvanic separation.

Interface converter USB-RS485
Interface converter USB-RS 485

 

Is designed for the mutual conversion of USB and RS-485 interface signals. It allows you to connect to RS-485 industrial information network a device (eg PC), which has a standard USB B - port. 

 

 

Documents

Interface converter USB-RS485_rus (pdf)